MARX-40T Knuckle Type High Speed Precision Press

Short Description:

Horizontally symmetrical symmetrical toggle linkage design ensure the slider moving smoothly near the bottom dead center and achieve a perfect stamping result,which meets the stamping requirements of lead frame and other products.Meanwhile,the motion mode of the slider reduces the impact on the mould at the time of high-speed stamping and prolongs the mould service life.


Product Detail

Product Tags

Main Technical Parameters:

Model MARX-40T
Capacity KN 400
Stroke length MM 16 20 25 30
Maximum SPM SPM 1000 900 850 800
Minimum SPM SPM 180 180 180 180
Die height MM 190-240
Die height adjustment MM 50
Slider area MM 750x340
Bolster area MM 750x500
Bed opening MM 560x120
Bolster opening MM 500x100
Main motor KW 15x4P
Accuracy   JIS/JIS Special grade
Upper Die Weight KG MAX 105/105
Total Weight TON 8

Main Features:

1.The knuckle type press maximizes its mechanism characteristics.it has the characteristics high rigidity.high accuracy and good heat balance.

2.Equipped with compelte counterbalance,reduce the displacement of die height due to the stamping speed change,and reduce the bottom dead point displacement of the first stamping and the second stamping.

3.Adopted balance mechanism to balance each side1 s force,its structure is eight-sided needle bearing guiding,further improve the eccentric load capacity of the slider.

4.New non-backlash clutch brake with long life and low noise,achiece more quiet press work.The size of the bolster is 1100mm(60 tonnage) and 1500mm(80 tonnage),which is the widest for their tonnage in ourfull range of products.

5.With servo die height adjustment function,and with die height memory function,reduce the mold change time and improve production efficiency.

MARX-40T

Perfect Stamping Effect:

Horizontally symmetrical symmetrical toggle linkage design ensure the slider moving smoothly near the bottom dead center and achieve a perfect stamping result,which meets the stamping requirements of lead frame and other products.Meanwhile,the motion mode of the slider reduces the impact on the mould at the time of high-speed stamping and prolongs the mould service life.

Perfect Stamping Effect

MRAX Superfine Precision一一Good Rigidity and High Precision:
The slider is guided by a guide of double plungers and octahedral flat roller with nearly no clearance in it.lt has good rigidity,high inclined loading resistance capability,and high punch press precision.High impact-resisting and wear-resisting property of the
Knuckle Type High Speed Precision Press
guide materils guarantee long-term stability of the press machine precision and prolong the intervals of repairing mould.

Structure Diagram-1

Structure Diagram

Structure Diagram

Press Products

Press Products
Press Products
案例图 (1)

Lead Frame

The die inside the package is typically glued to the lead frame, and then bond wires attach the die pads to the leads. In the last stage of the manufacturing process, the lead frame is moulded in a plastic case, and outside of the lead frame is cut-off, separating all leads.

Lead frames are manufactured by removing material from a flat plate of copper or copper-alloy. Two processes used for this are etching (suitable for high density of leads), or stamping (suitable for low density of leads). Stamping(punching or pressing) is the most effective, precise and high-tech way to produce Lead Frame nowadays.

The basic reason for the injury to agriculture caused by 60 Tons Knuckle Type High Speed Stamping Press is the lack of necessary protective devices and facilities, and the lack of effective labor protection for dangerous working procedures. The technical cause of the injury accident of punch press is the imbalance between the operator's action and the operation of the machine tool.


  • Previous:
  • Next:

  • Write your message here and send it to us