- Working site selection of......
1, high speed punch work site selection
(1) avoid direct exposure to sunlight and other heat radiation, avoid too much moisture or dust too much place, try to use in the air conditioning environment, keep room temperature around 20 degrees celsius. Because our country is in the temperate climate, is affected by the monsoon, the temperature difference is big, to the precision high, the price expensive numerical control machine tool, should put in the air conditioning room to use.
(2) to avoid corrosive gas. Due to corrosion of the gas easily make electronic components deteriorate, or cause bad contact, or cause a short circuit, the normal operation of the machine.
(3) to stay away from the big vibration equipment (such as punching, forging equipment, etc.). For high precision machine tools should also use anti vibration measures (such as anti vibration ditch, etc.).
(4) to avoid the strong electromagnetic interference, make the machine work stable.
Stamping is mainly classified according to the process, can be divided into two major categories of separation process and forming process. The separation process is also called blanking, the purpose of which is to make the stamping parts separate from the plate along a certain contour line, and at the same time to ensure the quality requirements of the separation section. The purpose of the forming process is to make the plastic deformation of the sheet material without breaking the blank, and to make the required shape and size of the workpiece. In the actual production, it is often used in a workpiece. Punching, bending, shearing, drawing, bulging, spinning and straightening are the main stamping processes.
High speed punching machine is equipped with the necessary accessories and tools: in order to give full play to the processing capacity of high-speed punch, must be equipped with the necessary accessories and tools. Avoid spending hundreds of thousands of dollars to buy a high-speed punch, due to the lack of a few tens of dollars or hundreds of dollars of accessories or tools to affect the normal operation of the machine. As a result of the signing of the contract to buy a separate unit price is much higher than the host with the supply of accessories price, therefore, the conditions of the enterprise as far as possible in the purchase of the host together with the purchase of vulnerable parts and other accessories.